SW-600Subwoofer Power Amplifier |
||
Features |
||
|---|---|---|
| Type of Power | Transformer Power Amplifier | |
| Mounting | 3U | |
| LCD Display | No | |
| Protection Function | DC safeguard, overheat, clipping, overload, short circuit protection | |
| Ground Switch | No | |
| Switching Mode | Mono | |
| Input Sensitivity Switch | No | |
| Ventilation Fan | Yes | |
| Low Cut VR at Front Panel | Yes. From 20Hz-80Hz | |
| Crossover VR at Front Panel | Yes. From 40Hz-160Hz | |
| Phase VR at Front Panel | Yes. From 0~180° | |
Specifications |
||
| Output Power | 600 Watts | |
| Bridge Output Power (RMS) | N/A | |
| Frequency Response | 40Hz-250Hz | |
| Signal to Noise Ratio | >95dB | |
| Total Harmonic Distortion | <0.1% | |
| Damping Factor | >250:1 (8Ω) | |
| Crosstalk | N/A | |
| Slew Rate | N/A | |
| Input Sensitivity | 0dB / 1.0V | |
| Input Impedance | 20kΩ balanced, 10kΩ unbalanced | |
| Voltage Gain (8Ω) | N/A | |
| Output Circuitry | N/A | |
| Air Cooling Direction | Air flow from rear to front | |
| AC Input | 230V 50Hz ± 10% | |
| Panel Indicator | Power & Signal (Blue), Clip (Red), Protect (Yellow) | |
| Front Panel Function | Power switch, volume control, low cut VR, crossover VR, phase VR | |
| Back Panel Function | N/A | |
| Mode Selection | Mono | |
| Input Connectors | XLR plug connector | |
| Output Connectors | Banana plug and speakon plug connector | |
| Product Dimension (W x H x D) | 318mm x 132mm x 432mm | |
| Packing Dimension (W x H x D) | 560mm x 170mm x 585mm | |
| Net Weight / Gross Weight | 20.0kg | |
| Set Per Carton | 1 set per carton | |
|
Explore |
Explore |
|